EdgeAccess® Universal Chassis System
The DMM will show that two Model
Figure 9. Chassis Management Screen Showing Inserted Modules
To access inserted modules from the UCS DMM Chassis Management screen:
•Press the SPACE BAR to move the cursor to the desired Slot number (refer to Figure 9).
•When the selected Slot number 4 is highlighted, press the CR (Carriage Return / Enter key).
•The WDM Information screen will appear, identifying the data of a polled module. All information that the DMM gathered for the selected module is shown in Figure 10.
•Press the SPACE BAR to select another installed component (reference Slot number 5).
•Press the ESC (Escape key) to return to the previous screens.
The WDM Information screen will show
WWDM Model 6002 information – no customer
configurable prompts are available. Press ESC to go to previous screen.
Figure 10. WDM Information Screen for the WWDM Model 6002
6002/6003/6004 WWDM Users Manual |
