Cooper Bussmann BU-905U-L Installing the Unit, Installing And Configuring The Unit

Cooper Bussmann BU-905U-L Wireless I/O Installation Manual

INSTALLING AND CONFIGURING THE UNIT

This section describes how to install and configure your unit and contains the following sections:

Section	Description
Installing the unit	Describes how to physically install your unit.
Configuring your unit	Describes the different ways to configure your unit.
Testing your unit	Describes the Bussmann recommendations for testing your unit.

For more information, see the next sections.

For more information, see … Installing the unit on page 23. Configuring your units on page 24. Testing your units on page 25.

Installing the Unit

To install the unit:

1.Connect signals to the supplied terminals.

2.Connect the radio antenna.

3.Install DIN rail to mount the module.

4.Clip the module to the DIN rail:

You can now configure your unit. For more information, Configuring your units on page 24.

3A1580Rev1.6 www.cooperbussmann.com/BussmannWirelessResources 23