Cooper Bussmann
Ancillary Hardware Reference Information
This section contains reference information about additional hardware components you may need for your unit.
RS232 Serial Cable
You can connect the unit to a PC using an RS232 serial cable to:
•Transfer configuration information;
•Perform factory and
The serial port is an 8 pin RJ45 plug that communicates using standard RS232 signals:
Signal information | Value |
Baud rate | 9600 |
Bits | 8 bits with 1 stop bit |
Parity | No parity |
Cooper Bussmann supplies a green configuration cable wired to the following
RJ45 | Required | Signal Name | Normal Color | DB9 |
1 |
| Ring Indicator | Green / White | 9 |
2 |
| Data Carrier Detect | Green | 1 |
3 | Y | Data Terminal Ready | Orange / White | 4 |
4 | Y | Signal Common | Blue | 5 |
5 | Y | Receive Data (from Modem) | Blue / White | 2 |
6 | Y | Transmit Data (to Modem) | Orange | 3 |
7 |
| Clear to Send | Brown / White | 8 |
8 |
| Request to Send | Brown | 7 |
3A1580Rev1.6 | www.cooperbussmann.com/BussmannWirelessResources | 27 |