Cooper Lighting Envoy manual Other Options, Vandal Resistant Solutions, Tamper Resistant Tr

21

22

OTHER OPTIONS

VANDAL RESISTANT SOLUTIONS

In applications where vandalism is a concern, a typical solution is to mount the luminaires out of reach. Mounting at elevated heights predictably results in lower light levels. To address vandalism Envoy has inherent, robust design features and various options to help prevent damage and unauthorized access.

TAMPER RESISTANT [TR]

This option features tamper resistant stainless steel hardware for lens, lens latches and fixture slide release mechanism. Head type T20 TorxTM center-pin reject type fasteners are provided. Vandal resistant screwdriver is available [separately as an accessory].

LUMINAIRE DESIGN

Envoy’s lens section ranges in thickness from minimum 0.125" in optical area to 0.250" in latch and fastening area for a robust design. A polycarbonate upper and lower lens option is available for additional impact strength.

TASK LIGHT [TL] APPLICATIONS

For complex lighting needs that require adjustability and flexibility, consider how the task light option can best offer solutions. This option features an MR16 lamp source available in 120v and 12v lamp types with a wide variety of beam patterns. Task lights can be used to bring visual attention to dedicated pathways that enter and exit the garage. Areas of high congestion may also benefit through use of multiple task lights when negotiation between vehicles and pedestrians is prominent. Illuminating stairwells, signage, parking appliances and pay booths for general and emergency lighting needs demonstrates the true and complete functionality of the task light feature.

1 1/8"

[29mm]

13 1/2"

[343mm]

Task light locations are specified by zones, A1-A4. Up to four [4] task lights are possible depending on specific configurations of the luminaire [see ordering information and footnotes].

A3

A2

7.56" A4 [192mm]

A1

45°

45°