DOUBLE-T STRUCTURAL CEILING
In typical
scenario this method traps a significant amount of light within the ceiling structure, leading to compromised light levels on the work plane.
When designing for T structure ceilings, the optimal
solution is to mount the fixture via pendant pipe at or
below the bottom plane of the beam level. Since beams
typically traverse laterally along the width of the garage,
using the rectangular [TG] distribution in the same
direction generally offers the best solution.
PENDANT MOUNT APPLICATIONS
Garage fixtures are commonly mounted to pendant pipes to bring the light source closer to ground level to achieve increased light levels. Many times
this is desirable due to higher ceiling heights or structural supports at the ceiling level that interfere and block light emitted from the luminaire. Envoy
offers multiple pendant mount solutions. When a bird nesting deterrent is required in pendant applications, use the [PBG] accessory.
Parking Garage
Ceiling
Envoy
Luminaire
FREE SWING PENDANT + PBG
ACCESSORY [OFFSET POSITION] Envoy is attached to the pendant box [PBG] accessory using the standard quick mount release bracket system. The pendant conduit pipe and free swing swivel hanger system are provided by others. Because the system is free swinging, the offset pipe position must be used to allow the fixture to hang straight.
RIGID PENDANT + PBG ACCESSORY
[CENTER or OFFSET POSITION]
Envoy is attached to the pendant box [PBG] accessory using the standard quick mount release bracket system. The pendant conduit pipe and suspension mechanism are provided by others. Because the system is rigid and
RIGID PENDANT + J-BOX
[CENTER POSITION]
Envoy is attached to a 4" junction box using the standard quick mount release bracket system. The pendant conduit pipe and junction box with center pendant entry access are provided by others. The center position of the