Manuals / Cornelius / Kitchen Appliance / Ice Maker

Cornelius 620053923, 629096853 Icemaker & Adaptor Hold-Down Kit Installation Instructions

Models: 620518916 620053922 620053923 629096853

1 9

Download 9 pages 9.34 Kb

Page 9

Icemaker & Adaptor Hold-Down Kit Installation Instructions

5.Using the supplied sheetmetal screws, screw four (4) screws per plate into the dispenser wrapper and icemaker base.

6.Repeat Steps 1 through 5 on the other side of the dispenser.

© 2008, IMI Cornelius Inc.

- 9 -

Publication Number: 629096853INS

Image 9

Cornelius 620053923, 629096853 Icemaker & Adaptor Hold-Down Kit Installation Instructions, 2008, IMI Cornelius Inc

Contents

Parts Included in the Kit are Shown in Table The Parts shown in Table 2 are NOT Used for this InstallationTools Needed ICEMAKER AND ADAPTER HOLD-DOWN KIT P/NLeft Side Straight Edge Goes to the Rear of the Dispenser Right Side Side Panel ScrewsNOTE Kit contains two plates, both mounting plates must be installed Flange on bracket MUST Go Over the Top of the Adapter Lid as ShownRun a Continuous Bead of Caulking Around the Adapter Top The Parts shown in Table 3 are NOT Used for this Installation INSTRUCTIONS FOR 30 INCH WIDE ICEMAKERS - FLAVOR FUSION UNITSDescription Insert Screws The Parts shown in Table 4 are NOT Used for this Installation INSTRUCTIONS FOR NON-30 INCH WIDE ICEMAKER - IDC SERIES UNITSDescription INSTRUCTIONS FOR 30 INCH WIDE ICEMAKER - IDC SERIES UNITS The Parts shown in Table 5 are NOT Used for this InstallationNOTE Kit contains two plates, both mounting plates must be installed DescriptionIcemaker & Adaptor Hold-Down Kit Installation Instructions 6. Repeat Steps 1 through 5 on the other side of the dispenser Icemaker & Adaptor Hold-Down Kit Installation Instructions2008, IMI Cornelius Inc Publication Number 629096853INS