Icemaker & Adaptor
Figure 15
2.Locate the two flat hold down brackets, shown in Figure 9.
3.Position the plate as shown in Figure 16, with the straight edge towards the rear of the unit and the top of the plate is about ¾ in. above the adapter lid.
3/4 in.
Figure 16
4.Using the plate as a template, drill 9/64 in. (0.140 in.) holes into the icemaker base and the dispenser, as shown in Figure 17.
CAUTION: Be careful not to drill too deep and/or too fast into the icemaker base and dispenser wrapper as damage may occur to unseen parts.
Figure 17
Publication Number: 629096853INS | - 8 - | © 2008, IMI Cornelius Inc. |
