Icemaker & Adaptor
CAUTION: Be careful not to drill too deep and/or too fast into the icemaker base and dispenser wrapper as damage may occur to unseen parts.
Figure 7
9.Install the second mounting plate on the other side of the icemaker base. Using supplied sheetmetal screws, screw four (4) screws per plate into the icemaker base and dispenser wrapper.
INSTRUCTIONS FOR 30 INCH WIDE ICEMAKERS – FLAVOR FUSION UNITS
CAUTION: Failure to follow the installation instructions correctly may result in equipment damage and/or personal injury.
The Parts shown in Table 3 are NOT Used for this Installation:
Table 3
Part No. | Description | Qty. |
|
|
|
|
|
|
22127 | Icemaker Rear Mounting Plate | 2 |
620053922 | Left Side Adapter | 1 |
|
|
|
620053923 | Right Side Adapter | 1 |
|
|
|
1.Using the supplied silicone tube, seal icemaker all around to the adapter top, as shown in Figure 8.
Figure 8
2.Remove the two top black side panel screws from both sides of the Flavor Fusion unit (See Figure 1) and save the screws.
Publication Number: 629096853INS | - 4 - | © 2008, IMI Cornelius Inc. |