Icemaker & Adaptor
INSTALLATION INSTRUCTIONS
ICEMAKER AND ADAPTER HOLD-DOWN KIT P/N 629096853
FOR FLAVOR FUSION / IDC UNITS ONLY
Instructions for
Parts Included in the Kit are Shown in Table 1:
Table 1
Part No. | Description | Qty. |
|
|
|
|
|
|
22127 | Icemaker Rear Mounting Plate | 2 |
50904 | Silicone sealant | 1 tube |
|
|
|
620053922 | Left Side Adapter | 1 |
|
|
|
620053923 | Right Side Adapter | 1 |
|
|
|
620518916 | Adaptor/Icemaker Side | 2 |
|
|
|
620701601 | 12 | |
|
|
|
Tools Needed:
•Power Drill
•9/64 in. (.140 in.) Drill Bit
•#2 Phillips Head Screwdriver
INSTRUCTIONS FOR NON-30 INCH WIDE ICEMAKER – FLAVOR FUSION UNITS
WARNING: Failure to follow the installation instructions correctly may result in equipment damage and/or personal injury.
The Parts shown in Table 2 are NOT Used for this Installation:
Table 2
Part No. | Description | Qty. |
|
|
|
|
|
|
620518916 | Adaptor/Icemaker Side | 2 |
1.Remove the two top black side panel screws from both sides of the Flavor Fusion unit (See Figure 1) and save the screws.
Release Date: June 30, 2008 | www.cornelius.com | Revision: 1 |
© 2008, IMI Cornelius Inc. | - 1 - | Publication Number: 629096853INS |