2.Carefully tilt the connected Unit up to expose the base.
3.Apply a silastic sealant e.g. Dow Corning RTV 731 or equivalent on all base edges.
4.Lower Unit into exact operating position on the countertop.
5.Fasten the tower to the countertop.
6.Apply additional sealant around the Unit so that the sealant has a minimum radius of 1/2 inch.
7.Seal the lines and plug the remaining opening with mastic material such as Permagum, or equivalent.
NOTE: When Unit is lowered into place, do not move it, or seal will be broken.
NOTE: All connections should be made before the Unit is sealed to the countertop.
5 | 630460001 |
