6.Push manual water fill switch and fill evaporator with water (approximately 5 seconds).

7.Put the “Clean/Run”switch in the “clean”position. Allow unit to run in the cleaning mode for at least 30 minutes.

8.Put the “Clean/Run”switch in the “run”position.

9.Depress the “Flush”switch push button and drain evaporator for about 1-1/2 minutes. Release push but- ton. Push manual water fill switch and allow evaporator to refill with water. Repeat Step 9 three (3) times to thoroughly remove cleaning solution from evaporator.

10.Depress the “Flush”switch push button for 1-1/2 minutes to drain the evaporator.

11.Remove the evaporator plug.

12.Put the “Stop/Run”switch in the “run”position and allow unit to run through at least three (3) complete ice making cycles or until ice is free of “sweet”taste.

WARNING: If unit fails to harvest ice, put the “Stop/Run” switch in the “stop” position. Depress the “Flush” switch push button for 1-1/2 minutes to drain the evaporator. Flush the evaporator with hot water to thoroughly melt all the ice in the evaporator. Repeat Step 9

to remove all traces of the cleaning solution from the evaporator.

13. Dispense all ice out of storage hopper and discard.

Dispenser Section

1.Turn off main electrical power supply to machine.

2.Remove agitator assembly from storage hopper and wash and rinse it thoroughly.

3.Wash down all inside surfaces of the ice storage area, including the top cover and ice drop cover with a mild detergent solution and rinse thoroughly to remove all traces of detergent.

4.Replace agitator.

5.Remove ice chute cover as follows:

A.Flex sides outward to disengage lower pins.

B.Lift ice chute cover to disengage upper pins.

C.Lower ice chute cover down out of unit. Note: It may be helpful to twist cover slightly.

6.Clean the inside of the ice chute and ice chute cover with a mild detergent solution. Rinse thoroughly to remove all traces of detergent.

7.Reverse steps above to reassemble ice chute.

8.Sanitize the inside of the hopper agitator, ice chute, the hopper cover and ice drop cover with a solution of 1 ounce of household bleach to 2 gallons of water. (200 PPM)

9.Replace the hopper cover and ice drop cover. Turn on the electrical power supply. The ice maker is ready for normal operation.

For Units With Beverage System

Cold Plate

1. Carefully remove the lower front panel. (Below beverage faucets).

15

90914

Page 17 Page 19
Page 18
Image 18
Cornelius SID851A/250S-BC, SID851W/250S-BC manual Dispenser Section
Page 17 Page 19

SID851W/250S-BC, SID851W/250S-B, SID851W/250S, SID851A/250S-BC, SID851A/250S-B specifications

The Cornelius SID851 series, including models SID851A/250S, SID851A/250S-B, SID851A/250S-BC, SID851W/250S, and SID851W/250S-B, stands at the forefront of beverage dispensing technology. Designed for both efficiency and versatility, these units are ideal for various commercial applications, from restaurants and bars to event catering and convenience stores.

One of the defining features of the SID851 series is its robust construction. These models are built to endure the rigors of high-demand environments, with durable materials that are both corrosion-resistant and easy to clean. This ensures long-term reliability and minimal downtime, crucial factors for businesses that serve high volumes of beverages.

The SID851 models are equipped with advanced cooling technologies, making them proficient in maintaining optimal beverage temperatures. The models utilize a state-of-the-art refrigeration system that ensures quick cooling and consistent temperature control. This feature is essential for preserving beverage quality, particularly for carbonated drinks that require specific serving conditions.

Each unit supports multiple beverage types, providing flexibility in service. The SID851A models, for instance, can easily transition between different drink options, allowing users to switch from sodas to mixed drinks without hassle. This versatility is enhanced by user-friendly interfaces that enable quick selection and adjustments.

Energy efficiency is another hallmark of the SID851 series. Designed with modern energy-saving technologies, these models not only reduce operational costs but also contribute to environmentally sustainable practices, making them ideal for businesses conscious of their ecological footprint.

The SID851W models offer an advanced wireless communication feature, allowing for seamless integration with point-of-sale systems. This smart technology facilitates real-time monitoring of beverage inventory and dispensing metrics, empowering business owners to make informed decisions based on data analytics.

Safety is paramount in the SID851 designs, featuring automated shut-off mechanisms to prevent overflows and spills. Additionally, the ergonomic design of the dispensing interfaces minimizes user strain, promoting a comfortable and safe working environment.

Overall, the Cornelius SID851 series represents a blend of innovation, durability, and efficiency, making them top choices for any beverage service operation. By investing in these models, businesses can enhance their service capabilities while ensuring that customer satisfaction remains a top priority.
Top Page Image Contents