ICE THICKNESS ADJUSTMENT

WARNING: Do not adjust ice thickness probe unless all other problem causes have been evaluated.

1.Open the hinged service door and remove the ice drop and hopper covers.

2.Collect and weigh the ice produced during the harvest cycle. The amount of ice harvested should weigh approximately five (5) pounds. Use the following procedure to adjust the probe to obtain this weight. (A clockwise adjustment will reduce the harvest weight while counterclockwise turns will increase the amount).

CAUTION: Do not turn the screw on the end of the probe. Rotate the plastic probe body only using a 3/8 inch open end wrench. Make adjustments in 1/8 inch turn increments.

A.Place the “Stop/Run”switch in the “Stop”position. (If unit is in the ice-making cycle, stop the unit at the end of the harvest cycle).

B.Access to the probe is obtained by removing the rear service panel. (For units without beverage fau- cets, the probe can be adjusted from the front by removing the lower front panel if rear access is blocked).

C.Adjust the probe.

D.Place the “Stop/Run”switch in the “Run”position.

E.Collect and weigh the ice harvested. Repeat step A through E as necessary to obtain the required amount of ice.

3.In making an initial adjustment (for example, if the probe has been removed and replaced for any reason), turn probe clockwise until it just touches the evaporator coil (a slight back pressure will be felt). Turn probe counterclockwise 2-1/2 turns. Follow procedure in step 2 to obtain the required ice harvest weight.

CLEANING/REPLACE THE FILTER

1.Remove the filter from the cabinet panel by sliding it forward toward the front of the unit.

2.Wash the filter in a solution of warm water and a mild detergent. Do not use caustic detergents as they may attack the aluminum filter elements.

3.Dry filter thoroughly.

4.For maximum effectiveness, reactivate the filter with an air filter coating (see Parts List, Miscellaneous Components).

CLEANING THE CONDENSER

Air-Cooled Units.

1.Disconnect power to the unit.

2.Remove the upper right side panel.

3.Remove all dirt/foreign material built up from the condenser fins (fan side). Be careful not to damage the fins. It is recommended that a power vacuum cleaner with a “crevice”tool attachment be used.

31

90914

Page 33 Page 35
Page 34
Image 34
Cornelius SID851A/250S-BC, SID851W/250S-BC manual ICE Thickness Adjustment
Page 33 Page 35

SID851W/250S-BC, SID851W/250S-B, SID851W/250S, SID851A/250S-BC, SID851A/250S-B specifications

The Cornelius SID851 series, including models SID851A/250S, SID851A/250S-B, SID851A/250S-BC, SID851W/250S, and SID851W/250S-B, stands at the forefront of beverage dispensing technology. Designed for both efficiency and versatility, these units are ideal for various commercial applications, from restaurants and bars to event catering and convenience stores.

One of the defining features of the SID851 series is its robust construction. These models are built to endure the rigors of high-demand environments, with durable materials that are both corrosion-resistant and easy to clean. This ensures long-term reliability and minimal downtime, crucial factors for businesses that serve high volumes of beverages.

The SID851 models are equipped with advanced cooling technologies, making them proficient in maintaining optimal beverage temperatures. The models utilize a state-of-the-art refrigeration system that ensures quick cooling and consistent temperature control. This feature is essential for preserving beverage quality, particularly for carbonated drinks that require specific serving conditions.

Each unit supports multiple beverage types, providing flexibility in service. The SID851A models, for instance, can easily transition between different drink options, allowing users to switch from sodas to mixed drinks without hassle. This versatility is enhanced by user-friendly interfaces that enable quick selection and adjustments.

Energy efficiency is another hallmark of the SID851 series. Designed with modern energy-saving technologies, these models not only reduce operational costs but also contribute to environmentally sustainable practices, making them ideal for businesses conscious of their ecological footprint.

The SID851W models offer an advanced wireless communication feature, allowing for seamless integration with point-of-sale systems. This smart technology facilitates real-time monitoring of beverage inventory and dispensing metrics, empowering business owners to make informed decisions based on data analytics.

Safety is paramount in the SID851 designs, featuring automated shut-off mechanisms to prevent overflows and spills. Additionally, the ergonomic design of the dispensing interfaces minimizes user strain, promoting a comfortable and safe working environment.

Overall, the Cornelius SID851 series represents a blend of innovation, durability, and efficiency, making them top choices for any beverage service operation. By investing in these models, businesses can enhance their service capabilities while ensuring that customer satisfaction remains a top priority.
Top Page Image Contents