Cortelco C62 user manual Auto Provision Setting, Dhcp Option Settings, Plug and Play Settings

	Auto Provision Setting
Field Name	Explanation
Current Config Version	Show the current config file’s version. If the version of
	configuration downloaded is higher than this, the configuration will
	be upgraded. If the endpoints confirm the configuration by the
	Digest method, the configuration will not be upgraded unless it
	differs from the current configuration.
Common Config	Show the common config file’s version. If the configuration
Version	downloaded and this configuration are the same, the auto provision
	will stop. If the endpoints confirm the configuration by the Digest
	method, the configuration will not be upgraded unless it differs from
	the current configuration.
CPE Serial Number	Serial number of the phone
User	Username for configuration server. Used for FTP/HTTP/HTTPS.
	If this is blank the phone will use anonymous.
Password	Password for configuration server. Used for FTP/HTTP/HTTPS.
Config Encryption Key	Encryption key for the configuration file
Common Config	Encryption key for common configuration file
Encryption Key
Save Autoprovision	Save the Autoprovision username and password in the phone until
Information	the server url changes

DHCP Option Settings

Field Name

Explanation

DHCP Option Setting	The phone supports configuration from Option 43, Option 66, or a
	Custom DHCP option. It may also be disabled.
Custom DHCP Option	Custom option number. Must be from 128 to 254.

	Plug and Play Settings
Enable PnP	If this is enabled, the phone will send SIP SUBSCRIBE messages to
	a multicast address when it boots up. Any SIP server understanding
	that message will reply with a SIP NOTIFY message containing the
	Auto Provisioning Server URL where the phones can request their
	configuration.
PnP Server	PnP Server Address
	67