Adjusting the PTA™ Lever
WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire.
It is easy to adjust the PTA™ feature. If you’ve moved the handlebar up or down, the PTA™ (Parallel Trimming Action) lever may need to be adjusted. When the PTA™ feature is properly engaged there should be just a little slack in the cable. For more information on PTA™, please read the section called Using PTA™ (Parallel
Trimming Action) on page 15.
1.Loosen the knob on the PTA™. (Figure 5).
2.Move the assembly up the handlebar to tighten the cable or down the handlebar to loosen it.
Figure 5
12 | DR® TRIMMER/MOWER™ Safety & Operating Instructions |
