INSTALLATION STEP 1

Determine the Header Bracket

Location

To prevent possible SERIOUSINJURYor DEATH:

Header bracket MUST be RIGIDLYfastened to structural support on headerwall or ceiling, otherwise garagedoor might not reversewhen required. DO NOTinstall header bracket over drywall.

Concreteanchors MUST be used if mounting header bracket or 2x4 into masonry.

NEVERtry to loosen, move or adjust garagedoor, springs, cables, pulleys, brackets, or their hardware, all of which are under EXTREMEtension.

ALWAYScall a trained door systems technician if garage door binds, sticks, or is out of balance. An unbalanced garagedoor might not reversewhen required.

Installation procedures vary according to garage door types. Follow the instructions which apply to your door.

1.Close the door and mark the inside vertical centerline of the garage door.

2.Extend the line onto the header wall above the door. You can fasten the header bracket within 4 feet (1.22 m) of the left or right of the door center only if a torsion spring or center bearing plate is in the way; or you can attach it to the ceiling

(see page 13) when clearance is minimal. (It may be mounted on the wall upside down if necessary, to gain approximately 1/2" (1 cm).

If you need to install the header bracket on a 2x4 (on wall or ceiling), use lag screws (not provided) to securely fasten the 2x4 to structural supports as shown here and on page 13.

3.Open your door to the highest point of travel as shown. Draw an intersecting horizontal line on the header wall above the high point:

3" (7.5 cm) above the high point for sectional door and one-piece door with track.

8" (20 cm) above the high point for one-piece door without track.

This height will provide travel clearance for the top edge of the door.

NOTE: If the total number of inches exceeds the height available in your garage, use the maximum

height possible, or refer to page 13 for ceiling installation.

Header Wall

Header Wall

"_, 3" (7.5 cm)Track

of Travel

Door

Sectional door with curved track

Header Wall

DoorHighest

Point

of Travel

Hardware

Header Wall

'_'_L _3" (7.5 cm!, Track

Y

of Travel

!

 

One-piecedoor with horizontal track

Header Wall

:8" (20 cm)

,"Highest

Point

of Travel

One-piece door=without track:

One-piecedoor without track:

jamb hardware

pivot hardware

12

Page 12
Image 12
Craftsman 139.53993D owner manual Installation Step, Determine the Header Bracket Location

139.53993D specifications

The Craftsman 139.53993D is a top-tier garage door opener designed for efficiency, convenience, and durability. This model is part of Craftsman's renowned lineup, known for reliable home improvement products. With its advanced features and technology, this garage door opener offers users a blend of functionality and modern convenience.

One of the standout features of the Craftsman 139.53993D is its powerful motor. Equipped with a robust 1/2 horsepower motor, it delivers strong lifting power, making it suitable for handling standard residential garage doors with ease. This strength ensures a smooth and reliable operation, even for heavier doors.

The technology integrated into the Craftsman 139.53993D significantly enhances security. This model utilizes a rolling code technology that changes the code each time the remote is used, making it nearly impossible for intruders to gain access. The safety features extend to the presence of an infrared safety sensor, which detects any obstacles in the door’s path and reverses its direction, preventing accidents and injuries.

Convenience is a key characteristic of this garage door opener. The Craftsman 139.53993D is compatible with various remote controls, including a keypad entry, allowing for keyless entry. Additionally, the model includes an integrated Wi-Fi capability. This feature grants homeowners remote access via a mobile app, enabling them to monitor and control their garage door from anywhere, adding an extra layer of convenience.

Installation is user-friendly owing to its clear instructions and included components. Most users can set it up in a short timeframe without professional help. Furthermore, the design of the motor unit is compact, allowing for easy placement and ensuring that it does not take up excessive space in the garage.

Alongside its functionality, the Craftsman 139.53993D is built with durability in mind. It features all-steel construction, providing long-lasting reliability and strength, suitable for the demands of daily use. The quiet operation is another impressive feature, ensuring that the door opens and closes smoothly without causing disturbances.

In summary, the Craftsman 139.53993D garage door opener stands out with its powerful motor, advanced security features, convenient technology, and robust construction. It reflects Craftsman's commitment to quality and innovation in home improvement solutions, making it a dependable choice for homeowners seeking a reliable garage door opener.