TROUBLESHOOTING

WARNING

Before performing any type of maintenance/service, disengage all controls and stop the engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting. Always wear safety glasses during operation or while performing any adjustments or repairs.

This section addresses minor service issues. To locate the nearest Sears Service Center or to schedule service, simply contact Sears at 1-800-4-MY-HOME®.

Problem

 

Cause

 

Remedy

Engine fails to start

1.

Choke control not in ON position

1.

Move choke control to ON position.

 

2.

Spark plug wire disconnected

2.

Connect wire to spark plug.

 

3.

Faulty spark plug

3.

Clean, adjust gap, or replace.

 

4.

Fuel tank empty or stale fuel

4.

Fill tank with clean, fresh gasoline.

 

5.

Engine not primed.

5.

Prime engine as instructed in the Operation Section.

 

6.

Safety key not inserted.

6.

Insert key fully into the switch.

 

 

 

 

 

Engine runs erratically

1.

Engine running on CHOKE

1.

Move choke control to OFF position.

 

2.

Stale fuel

2.

Fill tank with clean, fresh gasoline.

 

3.

Water or dirt in fuel system

3.

Drain fuel tank. Refill with fresh fuel.

 

4.

Carburetor out of adjustment

4.

Contact your Sears Parts & Repair Center.

 

 

 

 

 

Engine overheats

1.

Carburetor not adjusted properly

1.

Contact your Sears Parts & Repair Center.

 

 

 

 

 

Excessive vibration

1.

Loose parts or damaged auger

1.

Stop engine immediately and disconnect spark plug

 

 

 

 

wire. Tighten all bolts and nuts. If vibration continues,

 

 

 

 

have unit serviced by a Sears Parts & Repair Center.

 

 

 

 

 

Loss of power

1.

Spark plug wire loose.

1.

Connect and tighten spark plug wire.

 

2.

Gas cap vent hole plugged.

2.

Remove ice and snow from gas cap. Be certain vent

 

 

 

 

hole is clear.

 

 

 

 

 

Unit fails to propel itself

1.

Drive cable in need of adjustment

1.

Adjust drive control cable. Refer to Service and

 

 

 

 

Maintenance section.

 

2.

Drive belt loose or damaged

2.

Replace drive belt. Refer to Service and Mainte-

 

 

 

 

nance section.

 

 

 

 

 

Unit fails to discharge snow

1.

Chute assembly clogged.

1.

Stop engine immediately and disconnect spark plug

 

 

 

 

wire. Clean chute assembly and inside of auger

 

 

 

 

housing with clean-out tool or a stick.

 

2.

Foreign object lodged in auger.

2.

Stop engine immediately and disconnect spark plug

 

 

 

 

wire. Remove object from auger with clean-out tool

 

 

 

 

or a stick.

 

3.

Auger cable in need of adjustment.

3.

Adjust auger control cable. Refer to Assembly

 

 

 

 

section.

 

4.

Auger belt loose or damaged.

4.

Replace auger belt. Refer to Service and Mainte-

 

 

 

 

nance section.

 

5.

Shear pin(s) sheared.

5.

Replace with new shear pin(s).

 

 

 

 

 

25

Page 25
Image 25
Craftsman 247.8819 operating instructions Troubleshooting

247.8819 specifications

The Craftsman 247.8819 is a highly versatile and robust lawn mower designed for homeowners seeking a reliable and efficient tool to maintain their lawns. This mower stands out due to its impressive features, advanced technologies, and thoughtful characteristics that cater to both novice and experienced users.

One of the main features of the Craftsman 247.8819 is its powerful engine. Equipped with a reliable gas engine, it offers strong performance and the capability to tackle tough grass, ensuring a clean and precise cut every time. The high torque output allows this mower to handle various terrains with ease, making it a perfect choice for yards of different sizes and complexities.

Another remarkable feature is its variable speed transmission. This technology allows users to adjust the speed of the mower according to their comfort and specific mowing requirements. With the ability to operate at different speeds, users can maneuver through tight corners or open spaces more effectively, making for a more efficient mowing experience.

The cutting deck of the Craftsman 247.8819 is designed to provide optimal cutting performance. With a generous width, it enables users to cover more ground in less time. Additionally, it features multiple height adjustment settings, allowing for customized cutting heights to promote healthy grass growth. Whether users prefer a low cut for a manicured lawn or a higher cut for a more natural look, this mower can adapt accordingly.

Comfort and ease of use are also prioritized in the Craftsman 247.8819. Its ergonomic handles are designed to minimize strain during operation, and the mower's lightweight construction ensures easy maneuverability. Moreover, the mower is equipped with large, durable wheels that provide stability across varied terrains while ensuring smooth operation.

Maintenance is made simple with the Craftsman 247.8819. Its design promotes easy access to the engine and other components, allowing for straightforward maintenance tasks such as oil changes and blade sharpening. This ensures the mower remains in top condition and continues to perform efficiently over time.

In summary, the Craftsman 247.8819 offers a powerful engine, variable speed transmission, versatile cutting heights, and an ergonomic design, making it an excellent choice for homeowners. Its thoughtful features and ease of maintenance solidify its reputation as a dependable lawn mower for keeping lawns looking their best.