| OPERATION |
Throttle Control | Drive Control/ Auger Control Lock |
| DRIVE |
| CONTROL |
The throttle control is located on the rear of the engine. It regulates the speed of the engine and will shut off the engine when moved into the STOP position.
PrimerDepressing the primer forces fuel directly into the engine’s carburetor to aid in
This handle is used to manually start the engine.
Electric Starter ButtonPressing the electric starter button engages the engine’s electric starter when plugged into a 120V power source.
Electric Starter OutletRequires the use of a
Engine oil level can be checked and oil added through the oil fill.
GO
The drive control is located on the right handle. Squeeze the control grip against the handle to engage the wheel drive. Release to stop.
The drive control also locks the auger control so you can operate the chute directional control without interrupting the snow throwing process. If the auger control is engaged simultaneously with the drive control, the operator can release the auger control (on the left handle) and the augers will remain engaged. Release both controls to stop the augers and wheel drive.
NOTE: Always release the drive control before changing speeds. Failure to do so will result in increased wear on your machine’s drive system.
CHUTE TILT DOWN
Unthread the gas cap to add gasoline to the fuel tank.
AugersWhen engaged, the augers rotate and draw snow into the auger housing.
Auger ControlAUGER
CONTROL
GO
The auger control is located on the left handle. Squeeze the control grip against the handle to engage the augers and start snow throwing action. Release to stop.
PUSH BUTTON | PUSH BUTTON |
CHUTE ROTATE | CHUTE ROTATE |
LEFT | RIGHT |
CHUTE TILT UP
The
•To change the direction in which snow is thrown, squeeze the button on the chute control lever and pivot the chute control lever to the right or to the left.
•To change the angle/distance which snow is thrown, pivot the chute control lever forward to tilt the chute down and backward to tilt the chute up.
Skid ShoesPosition the skid shoes based on surface conditions. Adjust upward for
13