Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL |
| NAME | DESIGNATION/EXPLANATION | |
V | Volts |
| Voltage |
|
A | Amperes |
| Current |
|
Hz | Hertz |
| Frequency (cycles per second) | |
W | Watt |
| Power |
|
min | Minutes |
| Time |
|
| Alternating | Current | Type or a characteristic of current | |
no | No Load Speed | Rotational speed, at no load | ||
[] | Class II Construction | Designates | Double Insulated | |
|
|
| Construction | tools |
.../min | Revolutions | or Reciprocation Per Minute | Revolutions, | strokes, surface speed, |
|
|
| orbits etc. per minute | |
|
|
| Indicates danger, warning or caution. | |
,_ | Safety Alert Symbol | It means attention!!! Your safety is | ||
|
|
| involved. |
|
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
_i, SAFETY ALERT SYMBOL:
Indicates danger, warning,or caution. May be used in conjunction with other symbols or pictographs.
dl_ DANGER: Failure to obey a safety warning willresult in serious injury to yourself orto others. Always
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
,l_ WARNING: Failure to obey a safety warning can result in serious injuryto yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the riskof fire, electric shock and personal injury.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
Page 5
