KNOW YOUR COMPOUND MITERSAW
See Figure3.
Before attempting to use your saw, familiarize yourself
with all operating features and safety requirements.
_, WARNING: Donot allow familiarity withyour
sawto make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
15 AMP MOTOR
Your saw has apowerful 15 amp motor with sufficient
power to handle toughcutting jobs. It is made with all
ball bearings, and hasexternally accessible brushes
for ease of servicing.
10 in. BLADE
A 10 in.saw blade is included with your compound
miter saw. It will cut materials upto 2-5/8 in. thick or
5-3/4 in. wide, depending upon the thickness of the
material and the angle at which thecut isbeing made.
CUTTING CAPACITIES
When the miter angle (miter table) isset at0° and
the bevel angle is set at 0°:
Your saw will cut materials up to a maximum of
5-9/16 in. wide X 2-9/32 in. thick.
Itwill cutmaterials up to a maximum thickess of
3-9/16 in. thick X 4 in.wide.
When the miter angle (miter table) is set at 45° and
the bevel angle is set at O°:
Your saw wittcut materiatsup 1oamaximum of
3-15/16 in. wide X 2-9/32 in. thick.
When the miter angle (miter table) is set at 0°and
the bevel angle isset at 45°:
Your saw will cut materials up to a maximum of
5-9/16 in. wide X1-9/16 in. thick.
When the miter angle (miter table) is set at 45°and
the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of
4 in. wide X 1-9/16 in. thick.
SWITCH
LOCK-OFFLEVER
UPPER
BLADEGUARD SWITCHTRIGGER
DUSTGUIDE
BEVEL
LOCKKNOB
,LOWER
BLADEGUARD
MITERTABLE
ZONELABEL
"NOHANDSZONE
ZEROCLEARANCE
_OATPLATE
MITER
LOCKPLATE
MRER
TABLEFRAME
CONTROLARM
POSITIVESTOP(S)
MITER
LOCKHANDLE
Fig.3
10