CARRYING HANDLE
See Figure 4.
For convenience when carrying or transporting your miter saw from one place to another, a carrying handle has been provided on top of the saw arm as shown in figure 4. To transport, turn off and unplug your saw, then lower the saw arm and lock it in the down position. Lock saw arm by depressing the lock pin.
CARRYING
HANDLE
SAW
ARMLOCK PIN
MITER LOCK
HANDLE
SAWARM
LOCKEDIN DOWNPOSITION
Fig. 4
MITER LOCK HANDLE
See Figure 4.
The miter lock handle securely locks your saw at desired miter angles.
SPINDLE LOCK BUTTON
See Figure 5.
A spindle lock button has been provided for locking the spindle which keeps the blade in your saw from rotating. Depress and hold the lock button while installing, changing, or removing blade only.
SWRCH
SPINDLE
LOCKBUI"rON
Fig. 5
TRIGGER LOCK
See Figure6.
To prevent unauthorized use of your compound miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock (not included) through the hole in the switch trigger. A lock with a long shackle up to 17/64 in. diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.
SWITCH
TRIGGER
PADLOCK
Fig. 6
11
