Craftsman 315.21213 manual No Load Speed 5000, Rpm

BladeDiameter		10in.
BladeArbor		518in.
No Load Speed	5000	RPM
Rating	120 Volts, 60Hz-AC	Only
Input	15 Amperes
Net Weight	32 Ibs.

Your Compound Miter Saw has been shipped completely assembled except for the blade, miter lock

handle, and dust guide.

WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

•Remove all loose parts from the carton. Separate and check with the list of loose parts. See Figure 2.

•Remove the packing materials from around your saw.

•Carefully lift saw from the carton and place it on a level work surface. This saw is heavy. To avoid back injury, get help when needed.

Cutting Capacity with Miter at 0°/Bevel 0°:

5-7/16 in. wide x 2-9/16 in. thick 3-1/2 in. thick x 4 in. wide

Maximum Cutting Capacity with Miter at 45°/Bevel 0°:

3-7/8 in. wide x 2-9/16 in. thick

Maximum Cutting Capacity with Miter at 0°/Bevel 45°:

5-7/16 in. wide x 1-9/16 in. thick

Maximum Cutting Capacity with Miter at 45°/Bevel 45°:

3-7/8 in. wide x 1-1/2 in. thick

Do not discard the packing materials until you have carefully inspected the saw, identified all loose parts, and satisfactorily operated your new

saw.

Your saw has been shipped with the saw arm secured in the down position. To release the saw arm, push down on top of saw arm and cut the tie-wrap.

•Lift the saw arm by the handle. Hand pressure should remain on the saw arm to prevent sudden rise upon release of the tie wrap.

•Examine all parts to make sure no breakage or damage has occurred during shipping.

If any parts are damaged or missing, do not attempt to plug in the power cord and turn the switch on until the damaged or missing parts are obtained and are installed correctly.

7