Craftsman 315.21213 Cutting Capacities, Know Your Compound Miter Saw, Amp Motor, 10 in. BLADE

KNOW YOUR COMPOUND MITER SAW

See Figure 3.

Before attempting to use your saw, familiarize yourself with all operating features and safety requirements.

_1, WARNING: Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict

severe injury.

15 AMP MOTOR

Your saw has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings, and has externally accessible brushes for ease of servicing.

10 in. BLADE

A 10 in. saw blade is included with your compound miter saw. It will cut materials up to 2-9/16 in. thick or 5-7/16 in. wide, depending upon the angle at which the cut is being made.

CUTTING CAPACITIES

When the miter angle (miter table) is set at O° and the bevel angle Is set at O°:

Your saw will cut materials up to a maximum of 5-7/16 in. wide x 2-9/16 in. thick.

It will cut materials up to a maximum thickness of 3-1/2 in. thick x 4 in. wide.

When the miter angle (miter table) is set at 45 +and the bevel angle is set at O°:

Your saw will cut materials up to a maximum of 3-7/8 in. wide x 2-9/16 in. thick.

When the miter angle (miter table) is set at 0 °and the bevel angle is set at 450:

Your saw will cut materials up to a maximum of 5-7/16 in. wide x 1-9/16 in. thick.

When the miter angle (miter table) is set at 4S° and the bevel angle is set at 45+:

Your saw will cut materials up to a maximum of 3-7/8 in. wide x 1-1/2 in. thick.

SAW ARM

UPPER

BLADEGUARD

DUSTGUIDE

SWITCHTRIGGER

LOWER

BLADEGUARD

BEVEL	MITERTABLE
LOCKKNOB

	"NO HANDSZONE"
BEVEL!	LABEL
		"NOHANDSZONE"
MITER
		SCALE
FENCE	ZEROCLEARANCE
SCREW
	THROATPLATE
		lITER
		LOCKPLATE
	CONTROLARM	MITER
		LOCKHANDLE
MITER
	POSITIVESTOP(S)
TABLE FRAME

Fig. 3

10