KNOW YOUR COMPOUND MITER
SAW
See Figure 3.
Before attempting to use your saw, familiarize youmelf with all operating features and safety requirements.
_lb WARNING: Do not allow familiadty with your saw to make you careless. Remember that a
careless fraction of a second is sufficient to inflict severe injury.
15 AMP MOTOR
Your saw has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball beadngs, and has externally accessible brushes for ease of servicing.
10 in. BLADE
A10 in. saw blade is included with your compound miter saw. It will cut materials up to
CUTTING CAPACITIES
When the miter angle (miter table) Is set at 0° and the bevel angle Is set at 0°:
Your saw will cut materials up to a maximum width of
It will cut materials up to a maximum thickness of
When the miter angle (miter table) Is set at 45 ° and the bevel angle Is set at O°:
Your saw will cut materials up to a maximum of
When the miter angle (miter table) Is set at O° and the bevel angle Is set at 45°:
Your saw will cut materials up to a maximum of
When the miter angle (mRer table) is set at 45 ° and the bevel angle ia set at 45°:
Your saw will cut materials up to a maximum of 4 in. wide X
UPPER
BLADEGUARD
DUSTGUIDE
BEVEL
BEVELSCALE.
MITER
SAW ARM
SWITCH
LOWER
BLADEGUARD
MITERTABLE
NO HANDS
ZONELABEL
| "NO HANDSZONE" |
| BOUNDARYUNE |
| MITERSCALE |
| ZEROCLEARANCE |
| THROATPLATE |
| MITER |
| LOCKpLaTE |
| MITER |
CONTROLARM LOCKHANDLE | |
POSmVE STOP(S) | Fig. 3 |
|
10