The completed blower tube should look like Figure 6.
Elbow Tube
Zip Tie
Hose Clamp
t/ Flex Tube
Throttle Cables
Hose Clamp
On/Off Switch
Upper Blower Tube
Throttle Grip
First Lower
Blower Tube
Secure the Throttle Cables
Place a zip tie around the elbow tube and the throttle cables (Fig.
7)as shown, making sure not to crimp the cables.
Zip Tie._
Zip Tie
Fig. 7
Adjusting the Handle
1.Rotate the throttle grip counterclockwise around the blower tube until it is pointing directly downward (Fig. 8, A).
I _IIL | adjust. This may cause the throttle cables to | |
WARNING: | Do not rotate the handle clockwise to | |
| disconnect from the throttle grip or the engine. | |
A
Second Lower
Blower Tube
2. Pull or push the throttle grip along the handle tube until its distance from the backpack blower is comfortable (Fig. 8, B).
3. Align the throttle grip with the slot closest to the comfortable place and rotate the throttle grip clockwise into the upright position (Fig. 9).
Nozzle
| Fig. | 6 |
|
|
I_bk | sure that all four parts of | the blower tube | are locked in | Fig. 9 |
WARNING:place or firmly installedTo avoid. | serious personal | injury, make |
|
