Craftsman 320.17562 Batteries, Battery Pack Removal and Preparation for Recycling, Problem, Cause

BATTERIES:

The battery pack is equipped with Lithium-Ion rechargeable batteries. The duration of use from each charge will depend on the type of work performed.

The batteries in this tool have been designed to provide maximum trouble- free life. Like all batteries, they will eventually wear out. Do not disassemble the battery pack or attempt to replace the batteries. Handling of the batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, read, understand and follow this operator's manual.

•It is good practice to unplug the Charger/Adapter and remove the Lithium- Ion battery pack when not in use.

For Lithium-Ion battery pack storage longer than 30 days:

•Store the Lithium-Ion battery pack where the temperature is below 80°F (26°C) and free of moisture.

Store Lithium-Ion battery packs in a 30%-50% charged condition.

After every six months of storage, fully charge the Lithium-Ion battery pack.

Exterior may be cleaned with a cloth or soft non-metallic brush.

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING: Upon removal of the battery pack for disposal or recycling, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components. Lithium-Ion batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts, as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

PROBLEM

The tool does not work

Bit cannot be installed

Motor overheating

CAUSE

Battery is depleted

Sleeve is not released

Bit does not fit the sleeve

Make sure that the cooling vents are free from dust and obstacles

SOLUTION

Charge the battery

Release the sleeve

Use a 1/4" shank bit

Clean clear vents. Do not cover vents

during operation

17562 ManuaLRevised_$0 0607 Page 20 17562 ManuaLRevised_i0 0607 Page 2i