Craftsman 320.17562 warranty Know Your RIGHT-ANGLE Impact Driver Fig.l

SPECIFIC SAFETY RULES FOR CORDLESS RIGHT ANGLE IMPACT DRIVER

Hold power tools by insulated gripping surfaces when performing an

operation where the tool may contact hidden wiring or its own cord.

_]__o_j

KNOW YOUR RIGHT-ANGLE IMPACT DRIVER (Fig.l)

Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.

Secure the workpiece. Clamping devices or a vise will hold the workpiece in place better than the hand

Always wait until the machine has come to a complete stop before

placing it down. The tool can jam and lead to loss of control over the power tool.

Before performing any kind of work on the machine (e. g., maintenance, tool change, etc) as well as when transporting and storing it, always set the rotational direction switch to the center position. Unintentional

Fig. 1

Sleeve

LED Worklight

Direction of Rotation Selector (Forward/Center Lock/Reverse)

activation of the On/Off switch may result in personal injury.

Do not open the battery. There is risk of a short circuit.

Protect the battery from heat and fire. There is risk of explosion.

Variable

FuelGauge

Battery Release

Wear ear protectors with impact drills. Exposure to noise can cause hearing loss

Use protective gloves when removing the bit from the tool, or first allow the clamp to cool down. The bit may be hot after prolonged use.

Use protective gloves when operating the tool. Protective gloves can help

to keep you from being burnt and hurt.

Keep your hands away from the motor-housing vents. Hot gas comes from the vents during operation.

Do not operate the tool at full-load for more than 30 seconds, as this can cause the motor to become too hot, which may damage the motor.

Release the trigger immediately when the fasteners are sufficiently

tightened to avoid breaking the fasteners.

For best results, your battery tool should be charged in a location where the temperature is more than 32°F (O°C) but less that 104°F (40°C). Do not store outside or in vehicles.

Speed TriggerButton

Switch

Battery	Pack
		PRODUCT	SPECIFICATION
Motor			12 Volt		DC
Collar			1/4"
Switch			VSR	(Variable Speed		Reversible)
No Load	Speed		0-2100		RPM
Impacts	per	minute	0-3400		BPM
Torque			700	in.lbs
Driver Weight		(without battery)	1.83	Ibs	(without battery)
Battery	Type		Lithium-Ion
Battery	Voltage		12 Volt		DC
Charger	Input		120-Volts, 60 Hz AC			only
Optimum	Charging Temperature		32°F (0°C) -104°F (40°C)

17562 Manual_Revised_SO 0607 Page 8 17562 ManuaLRevised_lO 0607 Page 9