A

ABt,WARNING: The safe use of this product requires an understanding of the information on the tool and in this operator's manual, as well as knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

VARIABLE SPEED

The variable-speed trigger switch delivers higher speed with increased pressure and lower speed with decreased trigger pressure.

FORWARD/CENTER LOCK/REVERSE

The direction-of-rotation selector located above the trigger switch changes the direction of bit rotation. Setting the trigger switch in the OFF (center lock) position helps to reduce the possibility of accidental starting.

LED WORK LIGHT

Pressing the trigger switch illuminates the LED worklight. This feature provides extra light for increased visibility.

FuelGauge

Indicates the battery-pack charge level.

r • ,."_"]d_ I:] a5"4

AWARNING: If any part is broken or missing, do not attempt to plug in the power cord, attach the battery pack or operate the 12V Right-Angle Impact Driver until the broken or missing part is replaced. Failure to do so could result in possibly serious injury.

aWARNING: Do not attempt to modify this 12V Right-Angle Impact Driver or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.

AWARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the Right-Angle Impact Driver when assembling parts.

UNPACKING

This product has been shipped completely assembled.

•Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

•Inspect the tool carefully to make sure that no breakage or damage occurred during shipping.

•Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.

•If any parts are damaged or missing, please refer to the numbers listed on the back page of operator's manual.

PACKING LIST

Right-Angle Impact Driver, soft case, 1-3/8" Phillips screwdriver bit, 1A" nut driver bit, 3/8" nut driver bit, 5/16" nut driver bit, operator's manual.

[,]d d-'T-d[,], _1

LOW-BATTERY CAPACITY INDICATOR

NOTE: The new battery pack is not fully charged!

First, read the safety rules, and then follow the instructions in the sections entitled "Important charging notes" and "Charging the battery".

Important charging notes

1.Longest life and best performance can be obtained if batteries are charged at normal room temperature.

2.While charging a battery, the charger will normally become warm.

3.If the batteries do not charge properly:

A.Verify the current at the outlet by plugging in a lamp or other appliance and turning it on.

B. Determine whether the outlet is connected to a light switch that turns the power off when you turn out the lights; if so, make sure that the power is turned on.

4.The battery pack should be recharged when it fails to produce sufficient power on jobs that were previously done easily or when the FuelGauge shines red to indicate that the charge is depleted. Do not continue to use the tool under these conditions. Repeat the charging procedure.

5, Unplug the charger from the power supply before disconnecting it from the tool. Unplug the charger before attempting to clean.

6.Battery life depends on usage, storage temperature and time.

7.The charger is intended to be used in a vertical or floor-mounted position.

Unlike other battery types, Lithium-Ion battery delivers fade-free power for their entire run time. The tool will not experience a slow, gradual loss of power as you work. To signal that the battery is at the end of its run time and needs to be charged, the power to the tool will drop quickly.

NOTE: The LED worklight may flash slowly and the FuelGauge may not illuminate in the case of an overload or high temperature (see BA-I-i-ERY PROTECTION, Page 12).

17562 Manual_Revised_SO

0607

Page 10

17562 ManuaLRevised_lO

0607

Page 11

Page 5 Page 7
Page 6
Image 6
Craftsman 320.17562 warranty Variable Speed, I a54, T-d
Page 5 Page 7

320.17562 specifications

The Craftsman 320.17562 is a versatile and robust tool designed for both home and professional use. This compressor stands out for its reliable performance and innovative features, making it an essential addition to any workshop or job site.

One of the primary attributes of the Craftsman 320.17562 is its powerful motor. This compressor is equipped with a ¾ HP motor that guarantees consistent air delivery, ensuring that it can handle various tasks ranging from inflating tires to powering pneumatic tools. With a maximum pressure of 125 PSI, users can expect high-quality performance with ample pressure to suit most applications.

The design of this compressor reflects a user-friendly approach. It features an easy-to-read pressure gauge that allows users to monitor air pressure levels quickly. The on/off switch is conveniently positioned, making operation simple and straightforward. Additionally, the unit boasts a low-maintenance oil-free pump, which eliminates the hassle of regular oil changes and contributes to the overall efficiency of the tool.

Portability is another hallmark of the Craftsman 320.17562. Weighing in at a manageable size and equipped with a durable handle, this compressor is easy to transport from one job location to another. Whether working in a garage, on a construction site, or at home, users will appreciate the convenience of moving this compressor around as needed.

In terms of safety, the Craftsman 320.17562 includes a thermal overload protection feature. This technology prevents the motor from overheating, thus enhancing the longevity of the tool and ensuring safe operation during prolonged use. Additionally, the compressor is designed with stable footing, reducing the risk of tipping over while operational.

The Craftsman 320.17562 is compatible with a variety of air tools, making it an adaptable solution for several applications. From powering nail guns to spraying paint, this compressor consistently delivers dependable performance.

In summary, the Craftsman 320.17562 is an ideal choice for those seeking a reliable, portable, and efficient air compressor. With its powerful motor, user-friendly features, and versatile applications, it not only meets but also exceeds the expectations of both DIY enthusiasts and professionals alike.
Top Page Image Contents