Craftsman 486.24837 manual LEFT SIDE ViEW

iNSTALL HANGER BRACKETS AND SHOULDER BOLTSTO OUTSIDE OF FRAME

STEP 5: (SEE FIGURE 5)

,Remove the bolt, if present, in the hole directly behind the brake rod on the left side of the tractor frame.

*Attach the L.H. Hanger Bracket (tube facing out) to the hole using a 5/16" × 3/4" self threading bolt.

*Install a round head shoulder bolt into the hole that is 9-1/2" to the rear of the bolt you just installed. Secure it with a 3/8" flange nut on the inside of the frame.

BRAKE ROD

5/16" x 3/4" SELF

THREADING BOLT

L.H. HANGER

BRACKET

,	\
\\	\	\
\\	3/8" FLANGED
\	NUT
\_
FIGURE 5		LEFT SIDE ViEW

STEP 6: (SEE FIGURE 6)

oRemove the bracket, if present, from the hole directly

behind the end of the brake rod on the right side of the tractor frame. Store the bracket and bolt.

Attach the R.H. Hanger Bracket to the hole using a

5/16" x 3/4" self threading bolt.

Install a round head shoulder bolt into the hole that is 9-1/2" to the rear of the bolt you just installed. Secure it with a 3/8" flange nut on the inside of the frame.

5/16"x3/4"SELF

THREADING BOLT

RIGHTENDOF

BRAKEROD

R.H. HANGER

BRACKET

SHOULDER

BOLT

3/8" FLANGED

NUT

FIGURE 6 RIGHT SiDE ViEW