ASSEMBLY OF THE SNOW THROWER

STEP 48: (SEE FIGURE 47)

Place the lift handle into the lift bracket on the right side of the snow thrower. Fasten the handle to the bracket

using two 5/16" x 1-3/4" hex bolts and 5/16" Nylock nuts.

STEP 50: (SEE FIGURE 49)

Tilt the snow thrower back down to the ground. Remove the nylon tie which fastens the auger drive belt to the discharge housing, leaving the belt assembled around the pulleys.

Remove the nylon tie which fastens the chute crank rod to the crank rod support tube.

LIFT HANDLE

\

5/16" NYLOCK NUT

HEX BOLT 5/16" x 1=3/4"

LIFT BRACKET

Assemble the crank rod support tube to the bracket on the left side of the discharge housing using two 5/16" x 1-1/4" carriage bolts, and 5/16" Nylock nuts.

\

\

DISCHARGE_\\\

HOUSING\\

\

FIGURE 47

RIGHT SIDE VIEW

NOTE: Be sure the lift release cable's plastic covering stays inserted into the trigger assembly for the next step.

STEP 49" (SEE FIGURE 48)

Push the lift handle down into the locked position. Insert the end of the cable wire into the hole in the lift rod. Place the threaded fitting into the slot in the lift bracket, with one hex nut above and one hex nut and the lock washer below the slot. Tighten the nuts, adjusting them to eliminate slack in the cable wire. Refer also to the Service and Adjustments section on page 28 in this manual.

HINT: For easier assembly of the lift release cable, tilt the ,now thrower forward onto the spiral auger.

LIFT RELEASE

CABLE

HEX NUT

TRIGGER

ASSEMBLY

LOCK

WASHER

HEX NUT

CABLE

WIRE

LIFT

ROD

FIGURE 48

RIGHT SiDE ViEW

5/16" NYLOCK NUT

FIGURE 49

LEFT SIDE VIEW

STEP 51 : (SEE FIGURE 50)

Attach the chute tilt control assembly to the top side of the crank support tube using two 5/16" x 1-3/4" carriage bolts, bowed washers and 5/16" Nylock nuts.

 

CHUTE CRANK ROD

 

CRANK

SUPPORTTUBE

 

TiLT CONTROL HANDLE _(

 

5/16"

x 1=3/4"

TiLT

CONTROL

 

 

CARRIAGE BOLT

ASSEMBLY

 

BOWED WASHER

5/16" NYLOCK NUT

FIGURE 50

LEFT SiDE ViEW

22

Page 22
Image 22
Craftsman 486.24837 manual Assembly of the Snow Thrower, Discharge

486.24837 specifications

The Craftsman 486.24837 is a versatile outdoor power equipment tool that has garnered attention for its efficient performance and user-friendly features. Designed primarily for homeowners and gardening enthusiasts, this model serves as a reliable solution for various landscaping tasks, such as mowing lawns, managing garden beds, and trimming hedges.

One of the standout features of the Craftsman 486.24837 is its robust engine, which provides ample power to handle tougher jobs with ease. Equipped with a powerful motor, it enables users to tackle thick grass and harsh terrain that would typically challenge lesser models. The engine's efficient fuel consumption further enhances its usability, enabling prolonged use without frequent refueling.

In terms of cutting performance, the Craftsman 486.24837 incorporates an adjustable cutting height feature. This allows users to customize the height setting according to their specific needs, whether they are looking for a close trim or a more lifted finish for their lawns. The extended cutting deck ensures a wider cutting path, enabling quicker mowing, hence reducing overall time spent on yard tasks.

Durability is a key aspect of the Craftsman 486.24837. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. The sturdy build ensures that the machinery retains its efficiency and effectiveness over time, making it a worthwhile investment for regular maintenance.

The ergonomics of the Craftsman 486.24837 also deserve mention. With a comfortable grip and user-friendly controls, it minimizes user fatigue during prolonged use, allowing for smooth operation. The lightweight design enhances maneuverability, ensuring that both novice users and seasoned gardeners can operate it with confidence and ease.

In addition to its primary features, the Craftsman 486.24837 includes technologically advanced elements such as easy start mechanisms and safety features. These enhancements prioritize user safety while also making the operation more accessible for everyone.

In conclusion, the Craftsman 486.24837 stands out as a reliable, efficient, and easy-to-use outdoor power equipment. With features designed to improve cutting efficiency, durability, and user comfort, it serves as an invaluable tool for homeowners looking to maintain their outdoor spaces effectively. Its combination of power and practicality makes it a popular choice among gardening enthusiasts and landscape professionals alike.