OperatingInstructions
_lwayspull the tooltowardyou!
Do netpushit] Pushingthe bit
maycause it to break. Holdthe toolin a golfgrip
with the tool positioned below the attachment and the
bit pointing upwards.
Onyour variable speedtool, recommendedtool speed
is15.000-20,000 RPM's or speedsetting 6 to avoid
damageto the bit. Onyour two speedtool,
recommended tool speed is "Low"to avoid damageto
thebit. Do not force the bit or put pressure on the
back of the tool to remove the grout. Let the speed of
the rotating bit do the work.
GroutRemovalSafetyWarnings
Wear eyeprotection and dust mask. Inspect bit for
damage.When bit is installed, alwaysrun it at no-load
speed ofthe tool for one minute, asa damagedbit
witl break apart. Do not stand in front of or inline
with bit.
!
:Alwaysuse the tool with the depth guide positioned
flat against the material being cut.
Theguide securely positioned on the material
improves stability and control of your tool.
Thedirection of feedwith the bit into the grout is
important. Always drag or pull the bit through the
grout line.The grout bit is not intended for "plowing"
through the grout andfeeding the tool in the wrong
direction will causethe bit to climb out of the work
possibly damaging the bit and!or causing loss of
control.
iiI J
i
i
t'
19