Craftsman 580.75213 manual Checklist Before Starting Engine

3.Beforeconnectinggardenhosetowaterinlet,inspect inletscreen(A).Cleanscreenifitcontainsdebrisorhave it replacedif damagedDONOT.runpressurewasher if

inlet semen is damaged or missing.

6.Turn ONwater, point gun in a safe direction and squeeze trigger to purge pump system of air and impurities.

	WARNING
::_	Risk of eye injury.
_Spray	can sp ash back or propel objects.

Alwayswearsafetygoggleswhen usingthis equipmentor in vicinityof whereequipmentis in use

Beforestartingthe pressurewasher,besureyouarewearing adequatesafetygoggles

NEVERsubstitutesafetyglassesfor safetygoggles

. Run water through garden hose for 30 seconds to flush it of debris. Turn off water.

IMPORTANT:DO NOTsiphon standing water for the water supply. UseONLY cold water (less than 100%).

5.Connect garden hose (not to exceed50 feet in length) to water inlet. Tighten by hand.

Using a OneWay Valve (vacuum breaker or check valve)at pump inlet can cause pump or inlet connector damage.

ThereMUSTbeat leastten feetof unrestrictedgardenhose betweenthe pressurewasherinletandanydevice,suchas a vacuumbreakeror checkvalve.

Darnageto equipmentresultingfrom failureto followthis instructionwill void warranty.

Checklist Before Starting Engine

Reviewthe unit to ensure you have performed atl of the following:

1.Besure to read Safety Rules and Operationsections before using the cleaning system.

2.Makesure handle is in place and secure.

3.Checkthat oii has beenadded to proper level in engine crankcase.

4.Add proper fuel to fuel tank.

5.Checkfor proper hose connections (high pressure and water supply) and that there are no kinks, cuts, or damageto the high pressure hose.

6.Provide proper water supply (not to exceedlOB°F).

10