How to Stop Your Pressure Washer
Move variable pressure control lever on engine to "Stop" position.
Squeeze trigger on the spray gun to relieve pressure in the hose.
NOTE: A small amount of water will squirt out when
you release the pressure.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to store your nozzle extension and turbo nozzle, and slots to hold the cleaning solution bottle and the detergent siphoning filter. There are also two hooks at the ends of the handle to hold your spray gun.
1.Place nozzle extension through hole on accessory tray as shown.
2.Hang chemical solution bottle on ++J"hook and place detergent siphoning filter in last slot on left.
3.Place turbo nozzle in the last slot on right in tray.
4.Place spray gun on hook attached to accessory tray on right side of unit.
How to Use Spray Tips
The
latCh on the _figger,
Follow these inst_ucUons to change spray tips:
1.Engage safety latch on spray gun.
2.Pull back collar on
3.Select desired spray tip:
For gentle rinse, select white 40 ° spray tip.
To scour surface, select yellow 15° or red 0° spray tip.
To apply chemical, select black spray tip.
Low Pressure
Use to apply
chemical Black
High Pressure
YY
40_ White | 15+ Yellow | 0" Red |
4, Pull back on collar, insert new spray tip and release collar. Tug on spray tip to make sure it is securely in place.
5.For most effective cleaning, keep spray tip from
8 to 24 inches away from cleaning surface. If you get spray tip toe close, you may damage cleaning surface. DO NOT get closer than 6 inches when cleaning tires.
How to Use the Turbo Nozzle
The turbo nozzle rotates the high pressure stream in a rapid circular pattern. Always start the turbo nozzle at a distance, gradually getting closer to the surface until you get the cleaning force you want.
1.Pull back collar on
spray tip off. Store spray tips in holder provided on the nozzle extension.
2.Pull back on collar, insert turbo nozzle and release collar. Tug on turbo nozzle to make sure it is securely in place.
3.For most effective cleaning, keep turbo nozzle from 8 to 24 inches away from cleaning surface. If you get turbo nozzle too close, you may damage cleaning surface.
NOTE: Detergent cannot be applied with the turbo nozzle.
Cleaning and Applying Chemical
IMPORTANT: Use chemicals designed specifically for pressure washers. Household detergents could damage the pump.
10
