Service Spark Plug

Service the spark plug every 100 hours of operation or yearly, whichever occurs first.

WARNING

1.Clean area around spark plug.

2.Remove and inspect spark plug.

3.Replace spark plug if electrodes are worn, or if insulator is cracked or chipped.

4.For replacement use either the standard resistor spark plug, Champion RC12YC or the long life platinum spark plug, Champion RC12PYP.

5.Check electrode gap with wire feeler gauge and set gap at 0.020 inches (0.50ram), if necessary.

6.Install spark plug, tighten securely.

NOTE: You can purchase a new spark plug by calling 1-800-366-PART.

Carburetor

If you think your carburetor needs adjusting, see your nearest Sears service center. Engine performance may be affected at attitudes above 7000 feet. For

operation at higher elevations, contact your nearest Sears service center.

Spark Arrester Service

Your engine is not factory-equipped with a spark arrester. In some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations. A spark arrester is available from your nearest Sears service center. If you need to order a spark attester, please call 1-800-366-PART.

The spark arrester must be serviced every 50 hours to keep it functioning as designed.

If the engine has been running, the muffler will be very hot. Allow the muffler to cool before servicing the spark attester.

Remove spark arrester screen for cleaning and inspection.

Replace if screen is damaged.

15

Page 15
Image 15
Craftsman 580.753 manual Service Spark Plug, Carburetor, Spark Arrester Service