TROUBLESHOOTING CHART
CAUSEPROBLEM
Loss of power
(Continued)
Excessive
vibration
Engine continues
torunwhen
operator leaves
seat with
attachment
clutch engaged
Poor cut - uneven
Mower blades will
not rotate
• Build-up of grass, leaves
and trash under mower.
• Didy air filter.
• Low oil levelldidy oil,
• Faulty spark plug.
• Dirty fuel filter.
•Stale or dirty fuel.
•Water in fuel.
• Spark plug wire loose.
•Dirty engine air screen/fins.
•Dirty/clogged muffler.
•Loose or damaged wiring.
•Carburetor out of
adjustment.
•Engine valves out of
adjustment.
•Worn, bent or loose blade.
• Bent blade mandrel.
•Loose/damaged part(s).
• Faulty operator-safety
presence control system.
• Worn, bent or loose blade.
• Mower deck not level.
•Buildup of grass, leaves,
and trash under mower.
• Bent blade mandrel.
• Clogged mower deck vent
from build-up of grass,
leaves, and trash around
mandrels.
• Obstruction in clutch
mechanism.
• Worn/damaged mower
drive belt.
• Frozen idler pulley.
• Frozen blade mandrel.
CORRECTION
• Clean underside of mower
housing.
• Clean/replace air tilter.
• Check oil level/change oil.
• Clean and regap or change
spark plug.
• Replace fuel filter.
• Drain fuel tank and refill with
fresh gasoline.
• Drain fuel tank and carbure-
tor, refill tank with fresh
gasoline and replace fuel
filter.
• Connect and tighten spark
plug wire.
• Clean engine air screen/
fins.
•Clean/replace muffler.
•Check all wiring.
• See 'q'o Adjust Carburetor"
in Service Adjustments
section.
• Contact an authorized
service center/department.
• Replace blade.
Tighten blade bolt.
• Replace blade mandrel.
• Tighten loose part(s).
Replace damaged pads.
• Check wiring, switches and
connections. If not corrected,
contact an authorized
service center/department.
•Replace blade. Tighten
blade bolt.
• Level mower deck.
• Clean underside of mower
housing.
• Replace blade mandrel.
• Clean around mandrels to
open vent holes.
•Remove obstruction.
• Replace mower drive belt.
• Replace idler pulley.
° Replace blade mandrel.
31