Immediatelyprepareyour tractorfor storage at the end of the season or if the

tractor will not be used for 30 days or more.

_CAUTION: Never store the tractor with

gasoline In the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for

aperiod of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING" in the Maintenance section of this

manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Mainte- nance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear.

Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATrERY

Fully charge the battery for storage.

After a pedod of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected

and battery cleaned thoroughly (see

=TO CLEAN BA'I-I'ERYANDTERMI-

NALS" in the Maintenance section of this manual).

After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also,

alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

1.Drain the fuel tank.

2.Start the engine and let it run until the

fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run

engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach

the carburetor. Do not drain the gas tank

and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s) into cylinder(s).

3.Tum ignition key to start position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain

moisture. Do not use plastic. Plastic cannot breathe which allows conden-

sation to form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

28

Page 28
Image 28
Craftsman 917.274953 manual =TO Clean BAI-IERYANDTERMI, Engine Fuel System, Engine OIL, Cylinders, Other

917.274953 specifications

The Craftsman 917.274953 is a powerful and versatile lawn mower that has gained popularity among homeowners and landscaping enthusiasts. Known for its reliability and performance, this mower is designed to handle a variety of lawn sizes and types, making it an excellent choice for maintaining a beautifully manicured outdoor space.

One of the standout features of the Craftsman 917.274953 is its robust engine. Equipped with a 42-inch cutting deck, the mower is powered by a reliable Briggs & Stratton engine. This engine delivers sufficient power to tackle thick grass and uneven terrain with ease. The self-propelled drive system allows users to effortlessly maneuver the mower across their lawns, reducing fatigue and making the mowing process more efficient.

Another notable characteristic of this mower is its adjustable cutting height. With multiple height settings, users can easily customize the length of their grass to achieve their desired lawn appearance. This flexibility is particularly useful during different growing seasons, allowing users to adapt to changing grass conditions.

In terms of technology, the Craftsman 917.274953 incorporates innovative features that enhance its usability. The mower is designed with a rear bagging system, which efficiently collects clippings, leaving a clean finish after mowing. For those who prefer mulching, the mower also includes a mulching option that allows grass clippings to be finely chopped and returned to the soil, providing natural nutrients.

Additionally, the Craftsman mower boasts a durable construction, featuring a robust steel deck that ensures longevity and resistance to wear and tear. This quality construction not only extends the mower's lifespan but also enhances its performance in various weather conditions.

The ergonomic design of the mower offers user comfort, with an adjustable handle that accommodates different heights. This attention to comfort minimizes strain during extended use, making it suitable for homeowners with larger properties.

Overall, the Craftsman 917.274953 lawn mower combines powerful performance, user-friendly features, and durable construction, making it an excellent choice for those seeking to maintain a healthy and attractive lawn. Whether you have a small backyard or a larger landscape, this mower can adapt to your needs, making lawn care a more manageable and enjoyable task.