CHECK TIRE PRESSURE
The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.
•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.
CHECK MOWER LEVELNESS
For best cutting results, mower should be
properly leveled. See "TO LEVEL
MOWER HOUSING" in the Service and Adjustments section of this manual.
CHECK FOR PROPER POSITION OF ALL BELTS
See the figures that are shown for
replacing motion, mower drive, and mower blade drive belts in the Service
and Adjustments section of this manual.
Verify that the belts are routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see that the brake is
properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments section of this manual.
/CHECKLIST
Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this
Quality Product.
Please review the following checklist: /All assembly instructions have been
completed.
/No remaining loose parts in carton. ,/Battery is properly prepared and
charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and
tightened securely.
,/All tires are properly inflated. (For shipping purposes, the tires were overinfiated at the factow).
/Be sure mower deck is properly leveled
/Check mower and drive belts. Be sure
they are routed properly around pulleys and inside all belt keepers.
,/Check wiring. See that all connections
are still secure and wires are properly clamped.
While learning how to use your tractor, pay extra attention to the following important items:
/Engine oil is at proper level.
/Fuel tank is filled with fresh, clean, regular unleaded gasoline.
/Become familiar with all controls, their
location and function. Operate them before you start the engine.
/Be sure brake system is in safe operating condition.
9