ADJUST SEAT
I.Raise seat and loosen adjustment knobs.
2.Lower seat into operating position and sit in seat.
3.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.
4.Get off seat without moving its adjusted position.
5.Raise seat and tighten adjustment
knob securely.
NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.
Knob
TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)
1.Press lift lever plunger and raise attachment lift lever to its highest position.
2.Release parking brake by depressing clutch/brake pedal.
3, Place gearshift lever in neutral (N) position,
4. Roll tractor forward off skid.
TO DRIVE TRACTOR OFF SKID (See Operation section for location and functlon of controls)
_WARNING: Before starting, read, understand and follow all instructions in
the Operation section of this manual. Be sure tractor is in a
sure the area in front of tractor is clear of other people and objects.
1.Be sure all the above assembly steps have been completed.
2.Check engine oil level and fill fuel tank with gasoline.
3.Sit on seat in operating position,
depress clutch/brake pedal and set the parking brake.
4.Place gear shift lever in neutral (N) position.
5.Press lift lever plunger and raise attachment lift lever to its highest position.
6.Start the engine. After engine has started, move throttle control to idle position.
7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.
8.Slowly release clutch/brake pedal and slowly drive tractor off skid.
9.Apply brake to stop tractor, set parking
brake and place gearshift lever in neutral position.
lO.Tum ignitionkey to "STOP" position. Continue with the instructionsthat follow.
8
