TRACTOR

Always observe safety rules when

performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest

gear, then brake must be adjusted. (See 'q-OADJUST BRAKE" in the Service and

Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may

cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the brake pedal is fully depressed and attachment clutch control is in the

disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new or resharpened blade with stamped "THIS SIDE UP" facing deck and mandrel assembly.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Install and tighten blade bolt securely

(45-55 Ft. Lbs. torque).

IMPORTANT: Special blade bolt is heat treated.

Blade

Assembly

Blade Bolt

(Special', Center

Hole

TO SHARPEN BLADE

NOTE: We do not recommend sharpen-

ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will

cause excessive vibration and eventual damage to mower and engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone bal- ancer, follow the instructions supplied

with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

5/8" Bolt or

Hole

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

17

Page 17
Image 17
Craftsman 917.27528 owner manual Tires, Operator Presence System, Blade Care, Battery

917.27528 specifications

The Craftsman 917.27528 is a powerful and versatile lawn tractor designed to deliver superior performance and ease of use for homeowners and gardening enthusiasts. Known for its robust construction and a host of user-friendly features, this model has earned a reputation for reliability and efficiency in lawn care.

One of the standout features of the Craftsman 917.27528 is its 24 horsepower Briggs & Stratton engine. This powerful engine ensures smooth operation and is capable of handling even the most demanding mowing tasks. The engine is paired with a versatile automatic transmission, allowing for effortless speed adjustments while mowing or navigating through various terrains. This means users can easily transition from cutting grass to tackling hilly areas without sacrificing performance.

The lawn tractor is equipped with a 42-inch cutting deck, designed for optimal cutting efficiency. The deck features a three-blade system that provides a clean and even cut across various grass types. One of the highlights of this cutting deck is its adjustable height settings, allowing users to customize the cut based on their lawn's specific needs. In addition to traditional mowing, the Craftsman 917.27528 is compatible with a range of attachments, including mulch kits, baggers, and tow-behind devices, further enhancing its versatility.

Comfort is a priority in the design of the Craftsman 917.27528. The tractor features an ergonomic seat and easy-to-reach controls that make long mowing sessions much more enjoyable. The inclusion of a lap bar for steering provides better maneuverability and control, especially in tight spaces.

In terms of maintenance, the Craftsman 917.27528 stands out for its user-friendly design. Features such as an easy-access oil drain and a removable deck make routine maintenance tasks such as oil changes and blade sharpening straightforward, encouraging owners to keep their equipment in optimal condition.

Overall, the Craftsman 917.27528 combines powerful performance with practical features, making it an excellent choice for homeowners seeking a reliable lawn tractor. Its blend of technology, comfort, and adaptability helps ensure that mowing the lawn is a hassle-free experience. Whether for maintaining a small yard or tackling larger areas, this lawn tractor proves itself as a valuable asset in lawn care.