Gasoline

Your pressure washer engine is 4 cycle. Use unteaded fuel only.

CAUTION: Do not overfill the fuel tank. Always allow room for fuel expansion.

WARNING: Never fitl fuel tank indoors. Never fill fuet tank when engine is running or hot, Do

not smoke or have open flame when filting fuel tank.

Use clean, fresh, regutar unleaded gasoline with a minimum of 85 octane. Do not mix oil with gasoline.

If unleaded fue_ is not availaMe, _eaded fuel may be used.

iMPORTANT: It is important to prevent gum deposits from forming in essentia! fuel system parts such as the carburetor, fuel filter hose or tank during storage. Also,

experience indicates that alcohol-blended fuels (called gasohoi or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur,

NOTE: Never start pressure washer with out water source turned on and connected to pressure washer.

To Start Your Pressure Washer

Make sure fuel shutoff valve is turned to the open position.

OFF

FUEL SHUTOFF .,_/X:.iii_-i: - '_)',_

VALVE

Remove gas cap

®Add unleaded gasoline, slowly, to fuel tank. Do not overfill.

Connect garden hose to the water inlet on the pressure washer. Tighten by turning water intet counterclockwise.

Connect high pressure hose to discharge on pump. Connect the garden hose to the water spout and turn water supply on.

#! f! I , ; _,,

Squeeze trigger on pressure washer wand to relieve air pressure caused by turning on the water. Water witI spew out of the gun in a thin stream. This will make it easier to start the engine.

®Engage the safety latch on the spray gun. This locks the trigger in place and keeps you from accidentally spraying a high pressure stream.

AFETY

ATCH

o On the engine there is a choke!run lever. Place lever to the choke position.

__-_

_

 

 

--

_

z :t -_"_

...........J

On the engine there is a throttle control tever. Place throttte to the rabbit position. Always start engine with throttfe in the rabbit position. Place on/stop switch to the "on" postion.

ON

Make st_re fuel shut off valve is to the ope_ positio_.

Grasp the starter grip aad pull siow_y _ntit resistance is felt_ then pull firmly to start engine.

10

Page 9 Page 11
Page 10
Image 10
Craftsman 919.762500 manual To Start Your Pressure Washer, Valve
Page 9 Page 11

919.762500 specifications

The Craftsman 919.762500 is a high-quality air compressor designed to meet the demands of both DIY enthusiasts and professionals alike. This versatile tool is ideal for a variety of applications, from inflating tires and air mattresses to powering pneumatic tools such as nail guns and spray painters. Built with durability and performance in mind, the 919.762500 combines robust construction with advanced technology to deliver exceptional results.

One of the standout features of the Craftsman 919.762500 is its powerful motor. The unit is equipped with a 1.5 horsepower motor that operates at 120 volts, providing ample power for various tasks without sacrificing efficiency. The motor is designed for a high-performance output, allowing the compressor to quickly build pressure and keep up with demanding applications.

The air compressor has a maximum pressure rating of 135 PSI, which is suitable for most standard pneumatic tools. With a 6-gallon vertical tank, it provides an ample supply of compressed air, ensuring that you won't run out during a project. The vertical design saves space, making it an excellent choice for users with limited storage.

In addition to its powerful motor and efficient tank design, the Craftsman 919.762500 includes an easy-to-read pressure gauge, enabling users to monitor their output and adjust as necessary. A quick-connect coupling allows for fast and easy connections to air hoses and accessories, while the included rubber grip handle ensures mobility and transportability.

Safety is a priority with the 919.762500, and it comes equipped with a thermal overload protector that prevents the motor from overheating. This feature extends the lifespan of the compressor and enhances overall reliability during extended use.

The compressor operates fairly quietly for its class, which is a significant advantage for users who require a less disruptive working environment. Its lightweight construction and compact profile make it a suitable option for both home use and job site applications.

Overall, the Craftsman 919.762500 air compressor stands out for its combination of performance, reliability, and user-friendly features. It is an excellent investment for anyone looking to tackle a wide range of projects, large or small, with confidence and ease.
Top Page Image Contents