Craftsman 919.762500 manual Service Air Cleaner, To service air cleaner follow these steps

• Reinstal! the oil fill cap or plug and tighten securely.

Service Air Cleaner

To service pre-cleaner, wash in liquid detergent and water. Allow to dry thoroughly before using. Do not oil pre-cleaner. Replace if very dirty or damaged.

NOTE: Do not use petroleum solvents, e.g., kerosene, which wil! cause the cartridge to deteriorate. Do not use pressurized air to clean cartridge. Pressurized air can damage the cartridge.

To service air cleaner follow these steps:

I. Unscrew cover screws. Remove cover and air cleaner

assembly.

2.Remove cartiridge from cover, then retainer (if equipped) and pre-cleaner.

NOTE: Do not use petroleum solvents, e.g., kerosene, which will cause the cartridge to deteriorate. Do not use

pressurized airto clean cartridge. Pressurized air can damage the cartiridge.

3.Reassemble pre-cfeaner or retainer (if equipped.) Place in cover with pre-cleaner mesh side toward cartridge. Place cartridge in retainer in cover.

4.Push cover and air cleaner assembly squarely onto base (tabs must be in slots, if equipped) and hold firmly. Tighten cover screws securely.

Keep engine and parts clean!

Do not clean engine with a forceful spray of water because water could contaminate fuel system. With

a brush or cloth clean finger guard after every use to prevent engine damage caused by overheating.

RNGER

GUARD

Before running engine, clean muffler area to remove all combustible debris.

Clean and Replace Spark Plug

Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better.

RES1STOR

14