![Checklist](/images/new-backgrounds/98912/9891213x1.webp)
5._ Cut tie wrap off of high pressure hose, Unwind high pressure hose to attach the threaded end to
_e gURo
6.• Connect chemical hose to the chemical injector hose barb on pump.
CHEMICAL
INJECTOR
HOSE
PUMP
8._ Your units pump is shipped with a tempo_'a_ p_ug that must be repiaced with a breather cap, This p_ug is located over the pump's oil port. Unscrew and remove this plug. Remove the breather cap from the bag attached to the plug and instalJ it in the pump's oil port,
BREATHER
CAP
,& CAUTION" Failure to replace the plug will result I in serious pump damage.
9.• Place assembled gun and wand on pressure washer's handle bracket as shown.
7., Connect high pressure hose to the quick connect outlet on pressure washer.
Uti ' 1;
CONNECT
NOTE: Always keep hose away from engine muffier,
Checklist
Before going any further please review the following:
Be sure you have completed assembly instruction.
Double check aH fittings to be s{._rethey are tight.
IMPORTANT: Before any attempt to sta_ your pres- sure washer be sure to check engine oit (See Operation under Engine Oil, page 9.}