Know Your High Pressure Washer
Read this Owner's Manual and Safety Rules before operation of your High Pressure Washer Compare this illustration with our pressure washer to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
PUMP- Develops high pressure.
ENGINE OIL FILL- Place where engine oil is poured.
PRESSURE REGULATOR- Allows you to adjust the pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine in starting mode for recoil starter
HiGH PRESSURE HOSE
,\
GAS
PRESSURE
REGULATOR
BREATHER
CAP
PUMP OIL
PORT
ENGINE O_L
FILL
PUMP
CHEMICAL _NJECTOR WATER INLET
TUBE & F_LTER CONNECTION
RECOIL STARTER- Used for starting the engine manually.
SPRAY GUN ASSEMBLY- Controls the application of water onto cleaning surface with trigger device.
PUMP OIL FILL- Port where pump oit is poured and breather cap is located.
GAS TANK/CAP- Cap is removed and unleaded gasoline is poured.
CHEMICAL INJECTION TUBE AND FILTER- Mixes water and detergent in outlet water flow.
HIGH PRESSURE OUTLET- Connection for high pres- sure hose.
CHOKE- Lever used for starting unit.
GUN WAND
)./_IASSEMBLY
HANDLE
ON/OFF
SWITCH
MUFFLER
CHEMICAL
ADJUSTMENT
KNOB
HiGH PRESSURE OUTLET
