KNOW YOUR EDGER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
EDGER ATTACHMENT Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual for future reference.
Hanger
Depth Adjustment Knob
Gearbox
BLADE
TheBLADEisdesignedtocutsod.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional attachments are:
Cultivator ............ C944.511580
Blower .............. C944,511601
_WARNING:Always disconnect
powerhead spark plug (or disconnect powerhead from power source) before removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal- ling attachments, place the power- head and attachment on a flat surface for stability.
1.Loosen the coupler by turning the knob counterclockwise.
Blade Shield
.Wheel
Edger Blade
DEPTH ADJUSTMENT KNOB The DEPTH ADJUSTMENT KNOB is used to adjust the wheel for blade cut- ting depth.
Upper Shaft
Coupler
Lower
Attachment
TIGHTENKnob
2.Press and hold the locking/release button.
Locking/Release Button
Upper Shaft
Lower Attachment
3.While securely holding the upper shaft, pull the attachment straight out of the coupler.
7
