Craftsman D25083 Operation, Pressure Washer, Engine, Throttle Control Lever Controls engine speed

OPERATION

Know Your Pressure Washer

READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

Choke

Control

Throttle Control

Chemical
Hose
Spray	High
	Pressure
Gun	Hose

Hand

Grip

Air Filter

Fuel Valve Lever

Engine

Multi-Reg Wand

High

Pressure

Pump

PRESSURE WASHER

High Pressure Pump (located inside the shroud): Increases the pressure of the water supply.

Engine: Drives the high pressure pump.

High Pressure Hose: Carries the pressurized water from the pump to the gun and wand.

Spray Gun: Connects with wand to control water flow rate, direction, and pressure.

Multi-Reg Wand: Has a spray nozzle which adjust from a pencil stream (0°) to a wide angle fan spray (40°). The spray can be adjusted by twisting the nozzle clockwise and/or counter- clockwise. Also, the high and low pressure settings can be controlled by moving the nozzle in and out. See Operation section.

Chemical Hose: Allows cleaners or cleaning solvents to be mixed with the pressurized water stream. See How To Siphon Chemicals/Cleaning Solvents in Operation section of this manual.

ENGINE

Choke Control: Opens and closes the choke valve in carburetor.

Throttle Control Lever: Controls engine speed.

Starter Grip: Pulling starter grip operates recoil starter to crank engine.

Fuel Valve Lever: Opens and closes connection between fuel tank and carburetor.

D25083 10- ENG