Craftsman 919.672240, D25083 owner manual SAE Viscosity Grades, Engine

CUSTOMER RESPONSIBILITIES TABLE

	Before	Every 25	Every 50	Every 100
		hours or	hours or	hours or
MAINTENANCE TASK	each use
		yearly	yearly	yearly
ENGINE
check oil level	X
change oil			X
check air filter		X
clean/replace spark plug				X
PRESSURE WASHER
check/clean inlet screen	X
check high pressure hose	X
check soap and chemical	X
hose and filter
check gun and wand for leaks	X
prepare for storage	Prepare unit for storage if it is to remain idle for longer
	than 30 days

ENGINE

To Check Oil

1.Shut down engine and place on a level surface.

2.Remove filler cap/dipstick and wipe it clean.

Filler cap/dipstick

3.Insert and remove the filler cap/dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.

Oil Filler

Cap/Dipstick

Upper Limit

Lower Limit

4.If the oil level is low, fill to the edge of the oil filler hole with the

SAE 10W-30 oil.

NOTE: Other viscosities shown in the chart may be used when the average temperature in your area is within the recommended range.

SAE Viscosity Grades

**

*

Synthetic 5W-30, 10W-30

F -20	0	20	32 40	60	80	100
C -30	-20	-10	0	10	20 30	40

STARTING TEMPERATURES RANGE

ANTICIPATED BEFORE NEXT OIL CHANGE

15- ENG D25083