TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with specifications

of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

tCheck engine oil with tractor on level ground.,

2o Remove oil fill captdipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until

"FULL' mark on dipstick is reached.. Do not overfill.

For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section

of this manual).

,To change engine oil, see the Mainte- nance section in this manual.

ADD GASOLINE

Fill fuel tank to bottom of filler neck. Do not overfill.. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane.. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oilwith gasoline. Purchase fuel in quantities that

can be used within 30 days to assure fuel freshness_

_CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in temper- atures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting

CAUTION. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage.. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season.. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fueltank or permanent damage rnay occur,

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine..

I.Siton seat in operating position, depress

clutch/brake pedal and set parking brake.

2Place gearshift lever in neutral (N) posi- tion,

3 Move attachment clutch to disengaged position.

4.Move throttle controi to choke position. NOTE: Before starting, read the warm and cold starting procedures below.

5.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts, Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

WARM WEATHER STARTING (50 ° F and above)

6.When engine starts, move the throttle control to the fast position.

The attachments and ground drive can now be used If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above_

15

Page 15
Image 15
Craftsman LTS 1500 Towing Carts and Other ATTACH- Ments, Before Starting the Engine Check Engine OIL Level, ADD Gasoline

LTS 1500 specifications

The Craftsman LTS 1500 riding mower is a powerful and efficient machine designed for homeowners seeking an effective solution for lawn maintenance. This riding mower is equipped with a range of features and technologies aimed at enhancing performance and user comfort.

One of the standout features of the LTS 1500 is its robust 15.5 horsepower engine, which provides the necessary power for tackling a variety of mowing tasks. The engine offers reliable performance, ensuring that users can easily cut through thick grass and uneven terrain without difficulty. The mower's engine is matched with a smooth-running automatic transmission, allowing for effortless speed adjustments as users navigate their lawns.

The LTS 1500 features a wide cutting deck, typically sized between 42 to 48 inches, enabling users to cover large areas quickly. Its adjustable cutting height, which can be set to various positions, provides flexibility in achieving the desired lawn height, accommodating different grass types and mowing preferences. The deck design also facilitates efficient grass clipping management, leaving behind a neat and even finish.

Craftsman incorporates innovative technologies into the LTS 1500, such as the ReadyStart system, which ensures easy starting with minimal effort. This feature eliminates the need for priming or choking, making it ideal for those who may not be familiar with traditional gas-powered engines.

Ergonomics play a key role in the LTS 1500's design, featuring a comfortable high-back seat and easy-to-reach controls that enhance the overall user experience. The compact design allows for easy maneuverability, particularly in tight spaces and around obstacles in the yard.

Durability is a significant characteristic of the Craftsman LTS 1500, built with high-quality materials to withstand the rigors of regular use. The rugged construction assures users that their investment will last for many seasons, providing consistent performance year after year.

Another notable characteristic is the mower's ease of maintenance. The design allows for straightforward access to key components, making routine maintenance tasks such as oil changes, blade sharpening, and air filter replacements hassle-free.

In summary, the Craftsman LTS 1500 riding mower combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effectively. With its reliable performance, advanced technologies, and robust design, the LTS 1500 stands out as a dependable companion for lawn care enthusiasts.