TRANSAXLE GEAR SHIFT [.EVER NEU- TRAL ADJUSTMENT

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position, The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

1.Make sure transaxle is in neutral (N). NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

2_ Loosen adjustment bolt in front of the right rear wheel.

3o Position the gearshift lever in the neutral

(N)position..

4.Tighten adjustment bolt securely..

NOTE: If additional clearance is needed to

get to adjustment bolt, move mower deck height to the Lowest position.

Neutral Lock Gate

Gearshift_Lever _

TO ADJUST STEERING WHEEL ALIGN-

MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steering wheel and reassemble with crossbars horizontal. Tighten securely.

FRONT WHEEL TOE-INICAMBER

The front wheel toe-in and camber are not adjustable on your tractor.. If damage has occurred to affect the front wheel toe-in or camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS '1. Block up axle securely,

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose)..

3.Repair tire and reassemble,

NOTE: On rear wheels only. align

grooves in rear wheel hub and axle_ Insert square key.

4.. Replace washers and snap retaining ring securely in axle groove

5.Replace axle cover..

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion,. Washers

Retaining

AxleRing \

Square Key

(Rear Wheel Only)

TO START ENGINE WITH A WEAK BATTERY

_,WARNING: Lead-acid batteries gene rate explosive gases. Keep sparks, flame and smoking materials away from batteries,.

Always wear eye protection when around batteries_

If your battery is too weak to start the engine, it should be recharged.. (See "BATTERY" in the

MAINTENANCE section of this manual)° if "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Yourtractor is equipped with a 12 volt system The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles,

TO ATTACH JUMPER CABLES -

I.Connect one end ofthe RED cable to the POSITIVE (+)terminal of each battery(A-

B), taking care not to short against tractor chassis.

2Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully

charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery

24

Page 24
Image 24
Craftsman LTS 1500 manual Ment

LTS 1500 specifications

The Craftsman LTS 1500 riding mower is a powerful and efficient machine designed for homeowners seeking an effective solution for lawn maintenance. This riding mower is equipped with a range of features and technologies aimed at enhancing performance and user comfort.

One of the standout features of the LTS 1500 is its robust 15.5 horsepower engine, which provides the necessary power for tackling a variety of mowing tasks. The engine offers reliable performance, ensuring that users can easily cut through thick grass and uneven terrain without difficulty. The mower's engine is matched with a smooth-running automatic transmission, allowing for effortless speed adjustments as users navigate their lawns.

The LTS 1500 features a wide cutting deck, typically sized between 42 to 48 inches, enabling users to cover large areas quickly. Its adjustable cutting height, which can be set to various positions, provides flexibility in achieving the desired lawn height, accommodating different grass types and mowing preferences. The deck design also facilitates efficient grass clipping management, leaving behind a neat and even finish.

Craftsman incorporates innovative technologies into the LTS 1500, such as the ReadyStart system, which ensures easy starting with minimal effort. This feature eliminates the need for priming or choking, making it ideal for those who may not be familiar with traditional gas-powered engines.

Ergonomics play a key role in the LTS 1500's design, featuring a comfortable high-back seat and easy-to-reach controls that enhance the overall user experience. The compact design allows for easy maneuverability, particularly in tight spaces and around obstacles in the yard.

Durability is a significant characteristic of the Craftsman LTS 1500, built with high-quality materials to withstand the rigors of regular use. The rugged construction assures users that their investment will last for many seasons, providing consistent performance year after year.

Another notable characteristic is the mower's ease of maintenance. The design allows for straightforward access to key components, making routine maintenance tasks such as oil changes, blade sharpening, and air filter replacements hassle-free.

In summary, the Craftsman LTS 1500 riding mower combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effectively. With its reliable performance, advanced technologies, and robust design, the LTS 1500 stands out as a dependable companion for lawn care enthusiasts.