Service
!WARNING
•The motor is oil filled and sealed for cooler run- ning. Allow 2 hours for the motor to cool before servicing. Hot oil is under pressure and could result in severe burns.
•Pump service must be performed only by qual- ified repair personnel. Service or maintenance performed by unqualified repair personnel could result in injury and may void the warranty.
•When servicing a pump, use only identical replacement parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electrical shock or injury.
NOTE! Disassembly of the motor will void warranty.
Specific Safety Information
!WARNING Risk of electric shock. This pump is supplied with a
For your own safety, before assembling and operating this unit, read this operators manual carefully and com- pletely. Learn the operation, application, and potential hazards peculiar to this unit.
Call the Ridge Tool Company, Technical Services Department at (800)
Submersible Pump Safety
!DANGER
•Do not use to pump flammable or explosive flu- ids such as gasoline, fuel oil, kerosene, sol- vents, thinners etc. Do not use in a flammable and/or explosive atmosphere. Pump should only be used to pump clear water. Improper use could result in personal injury and/or death.
!WARNING
•If there is water or moisture on the floor or
ground near the pump, do not walk on wet area until all power is turned off. If the
•Always disconnect the power source before attempting to install, service, relocate, or main- tain the pump. Never handle a pump or pump motor with wet hands or when standing on wet or damp surface or in water. Failure to follow this warning could result in personal injury and/or death.
•Pump motor is equipped with automatic reset- ting thermal protector that could restart unex- pectedly. Disconnect power source when servic- ing pump.
•Do not modify float or position float switch so that pump will operate continuously. Pump is not designed for continuous operation, this will reduce performance and life of the pump.
•Do not hang pump by handle for permanent installation. This minimizes twisting which can lead to damage during pump operations.
Description and Specifications
Description
The submersible pump is designed for home sump operations only. The unit is equipped with an 8 foot, 3- prong grounding type power cord. The motor has an automatic reset thermal protector to prevent burnouts due to overloading or clogging. A float activated switch provides automatic operation to maintain water level between factory preset points.
NOTICE This pump is not designed to handle salt water, brine, laundry discharge, or any other appli- cation which may contain caustic chemicals and/or for- eign materials. This pump is not suitable for use with aquatic life. Pump damage or failure could occur if used in these applications and will void the warranty.
NOTICE It is strongly recommended that a battery
Ridge Tool Company | 3 |
