A typical wash programme

Before selecting any programme ensure the mains button is in the ‘off’ position.

1. Sort laundry into same wash requirements.

4.Select wash programme by turning the wash dial clockwise.

7.Check water and electricity are switched on at mains.

2.Close door, applying pressure only at the 2 o’clock position.

5.Select optional wash features by pressing required button.

8.Press the Power button to Start the programme. After a few seconds the Door Locked indicator will illuminate.

3.Add detergent/ conditioner (See manufacturer’s instructions).

6.Select reduced spin (Model W120VW only), if required, by turning the control dial.

9.Approximately 1-2 minutes after the pro- gramme has finished the indicator light will go out and the door can be opened. Press the Power button to ‘OFF’.

We recommend, on completion of your wash programme that you switch ‘Off’ both the the electricity and water supply to the appliance.

6

Page 6
Image 6
Creda W100FW, W120VW, W120FW manual Typical wash programme