DigitalMedia™ Room Controller Crestron DM-RMC-100
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
3 VIDEO LED (1) Red/green dual color LED
indicates video signal presence
and lock status:
Green: Indicates that the
device is receiving video
Red: Indicates no video
Blinking Red/Green: Indicates
errors in the video stream.
4 CNTRL (1) Red/green dual-color LED
indicates Ethernet connection
and control system
communication status.
5 SETUP (1) Red LED and (1) miniature
recessed pushbutton, for
Ethernet auto-discovery.
6 SENS
(1) 2-pin 3.5mm detachable
terminal block;
Digital/contact closure sensing
input
Rated for 0-24 Volts DC,
referenced to GND
Input Impedance: 2.2k ohms
pulled up to 5 Volts DC
Logic Threshold: 2.5 Volts DC
nominal with 1 Volt hysteresis
band.
7 HDMI
(1) 19-pin Type A HDMI
female;
HDMI digital video/audio output
(Continued on following page)
6 • DigitalMedia™ Room Controller: DM-RMC-100 Operations & Installation – DOC. 6743A